|
If your clutch has not been fitted properly you want to ensure that your flywheel gets a good looking at.
It might be the thrust bearing and arm have scored or damaged the flywheel....this will wear out a new clutch very quickly
You should also check that your oil isnt leaking into the water system or vice versa.....easily done by taking off the oil filler cap and seeing it there are any white deposits inside and around the neck of the filler
Water.....simply take off the expansion tank filler....best done when cold and see if you can see a sort of oil slick lying on the water.
I would also park the car up level somewhere over night and then in the morning reverse a few feet and see if there is any oil lying on the ground
|